The finished product, complete with the Rode Universal Mounting Bracket.
The bits ready to be glued back together.
Test fitting the blimp back together before gluing.
Trimming neatly along the hexagonal edges gives plenty of surface area to glue.
Trimmed aluminium extrusion.
Trimming the Aluminium to length.
Test fitting the altered metalwork to the smaller blimp.
Gluing the threaded ends back onto the barrel.
The trimmed down pistol shock mount. Pay attention to the measurements on the mount. You don’t want to cut off the wrong end!
Modifying the Blimp’s barrel to be approximately the same length as the MKH8060
Modified wombat fur to suit.